Electrolux Refrigerator Error Code Normal – SH

If your Electrolux refrigerator displays the error code “SH,” it indicates a potential issue with the Fresh Food Sensor. This code is specifically designed to alert users when the sensor responsible for monitoring the temperature in the fresh food compartment has encountered a short circuit.

Details of the Error Code SH:

• What Does “SH” Mean? The “SH” error code stands for “Sensor Shorted.” This occurs when the electrical circuit within the Fresh Food Sensor is disrupted, leading to a malfunction in temperature monitoring.

• Possible Causes:

  • Wiring Issues: Check for any damaged or frayed wiring connected to the Fresh Food Sensor.
  • Sensor Malfunction: The sensor itself may be faulty or damaged.
  • Electrical Interference: External factors, such as electrical interference, could disrupt the sensor’s functionality.

• Symptoms:

  • Fluctuating or inaccurate temperature readings in the fresh food compartment.
  • The refrigerator may not maintain the set temperature, leading to potential food spoilage.

• Troubleshooting Steps:

  1. Inspect Wiring: Examine the wiring connected to the Fresh Food Sensor. Replace any damaged or frayed wires.
  2. Check Sensor: Verify the condition of the Fresh Food Sensor. If damaged, a replacement may be necessary.
  3. Reset the Appliance: Power cycle the refrigerator by unplugging it for a few minutes and then plugging it back in.
• If the issue persists after performing the troubleshooting steps or if you are uncomfortable dealing with electrical components, it is advisable to seek assistance from a qualified appliance repair technician.